Everyone is familiar with steel cord conveyor belts, so in daily production and life, the maintenance of steel cord conveyor belts is very important. It can not only extend the service life, but also save maintenance costs. Let us take a look at the steel cord core. How to maintain the conveyor belt!

During transportation and storage, the conveyor belt should be kept clean to avoid direct sunlight or rain and snow, avoid contact with acids, alkali oils, organic solvents and other substances, and be away from the heating device one meter away. During the storage period, the product must be placed in a roll and not folded. During the storage period, the product should be turned over every quarter. The type, structure, standard and number of layers of the conveyor belt should be selected reasonably according to the operating conditions.

During storage, the relative temperature in the warehouse should be between 50-80%RH, and the temperature should be between -18℃-40℃. The diameter of the transmission roller of the conveyor, the matching of the conveyor belt cloth layer, the matching of the conveyor roller, the reversing roller, and the requirements for the roller groove angle should be selected reasonably according to the planning rules of the conveyor. Conveyor belts of different types and standard layers are not suitable to be used together, and the joints are glued. The feeding direction should follow the running direction of the tape. In order to reduce the impact on the tape when the material falls, a chute should be selected to reduce the material falling distance.

The running speed of the conveyor belt should generally not be as large as 2.5 m/s, and the material with large lumpiness and abrasion and the use of fixed plough-type unloading equipment should be as low as possible. In the belt receiving section, the distance between the rollers should be shortened and the buffer roller should be selected. To avoid material leakage, a soft and moderate baffle should be used on the belt side to avoid the baffle from being too hard and scratching the belt surface of the conveyor belt.

The above is the maintenance of the steel cord conveyor belt. Doing a good job of maintenance is equivalent to reducing the maintenance cost, reducing the hidden danger of accidents, and increasing the service life of the steel cord conveyor belt. I hope the above content can help everyone!