Conveyor belts are often seen in our daily lives, and everyone is familiar with them. They are divided into layered conveyor belts, steel wire rope conveyor belts, etc. However, due to the lack of timely maintenance in daily work, the service life of the conveyor belt is reduced. So how to extend the service life of the conveyor belt, let's take a look at it together!

The bearing point is the easily damaged part of the conveyor belt. The belt speed and the material lumpiness related to the conveyor belt operation, the impact and the direction of the load-bearing operation are all important factors. The conveyor belt should be kept clean during transportation and storage, avoid direct sunlight or rain and snow, prevent contact with acid, alkali, oil, organic solvents and other substances, and be 1 meter away from the heating device. When cleaning the dust under the belt conveyor roller, it should be carried out when parking, and it is strictly forbidden to walk on the belt conveyor.

During the storage period of the conveyor belt, the products must be placed in rolls and not folded. During the storage period, they should be turned over every quarter. To prevent the rollers from being covered by the material and causing the rotation failure, to prevent the leakage of the material between the card and the roller and the tape, pay attention to the lubrication of the movable part, but do not make the conveyor belt stick to oil. Conveyor belts of different types and specifications are not suitable for use together, and the joints are glued. The relationship between the diameter of the drive roller of the roller conveyor belt and the cloth layer of the conveyor belt, the matching of the drive roller and the reversing roller, and the requirements for the roller groove angle should be selected reasonably according to the design requirements of the belt conveyor.

The transfer of materials at the angle between the movement direction of the conveyor belt will only increase the abrasion of the surface of the tape. The impact of the material and the tape will deviate from the feeding in the middle, which will cause the tape to crawl along the rotating idler to the other side and deviate, resulting in the tape Damage to the edges. Regular inspection of the conveyor belt itself and timely treatment is an important measure to prevent accidents and increase the service life of the belt. The conveyor belt should be inspected carefully to check whether the conveyor belt is damaged, degummed, shifted, or opened. In case of damage, the equipment should be cut off in time, and the relevant maintenance personnel should be found for maintenance and inspection.

The above is the method to extend the service life of the layered conveyor belt. Regular cleaning and maintenance of the layered conveyor belt is an important factor in extending its service life and a method to reduce the hidden danger of accidents. I hope the above content can help everyone.